XN-2410

2.4GHz 2T2R MIMO, 300Mbps, Multi-task Access Point EIRP 35dBm (4 Watt with 8-dBi MIMO antenna)

4W high output power 2T2R MIMO multi-task Access Point performing AP/CPE/Bridge. It is the best choice for all full outdoor environmental long range wireless Ethernet networking applications: WISP, Internet/LAN extension, rural telephony basing on VOIP gateway, long range wireless surveillance, campus/city/park hotspot, field mesh network…
  • Advanced MIMO technology: 300Mbps 2T2R MIMO 802.11NGB
  • Big RF power 1W(30dBm) or EIRP 35dBm (4-watt with 8-dBi MIMO antenna)
  • Huge memory, 32MB + 8MB supporting prevailing and enhanced features
  • Multi-functional: AP/Bridge/client/repeater
  • Management tool with map view.
  • Ping watch dog
  • Traffic shaping
  • Auto MDI/ MDIX
  • Support VLAN , VPN pass through & SNMP
  • QoS: WMM, MAC filter, spanning tree protocol
  • IP55 enclosure weather proof supporting -25c ~ 75c


Standards Compliance IEEE 802.11n/b/g; IEEE 802.3; IEEE 802.3u; IEEE 802.3pd
IEEE 802.3x; IEEE 802.3af
SDRAM 32 M Byte
Flash 8 M Byte
Modulation MIMO HT-OFDM
Frequency Band America/FCC: 2.412~2.462 GHz
Transmission Power Up to 30dBm (1W) or EIRP 35dBm (4-watt with 8-dBi MIMO antenna)
Channel Bandwidth HT-20, HT-40
Access Point Interfaces Auto MDI/MDI-X Ethernet 10/100 Base-TX: RJ-45
Sensitivity -93@1Mbps; -84dBm @ 11Mbps; -75dBm @ 54Mbps;
-68dBm@HT-20, MCS-15; -64dBm@HT40, MCS-15
Antenna Type 8 dBi MIMO
Security Systems 64-bit / 128-bit WEP encryption; Wi-Fi Protected Access (WPA) / WPA2
Wireless Setting Operation Mode – AP / Repeater / Bridge PtP and PtMP/Client
Software/Firmware Site survey
DHCP Client
Suppressed SSID
Station Separation
Spanning Tree settings
Wireless access control by MAC address filter (up to 50)
Traffic shaping
Profile isolation from each other using VLAN (802.1q) standard
Web-GUI
Cloud management
Firmware upgrade and configuration backup via Web Browser
Reset and/or restore to default by WebUI or by Reset button
Support Auto-reboot & schedule reboot
VPN pass-through
SysLog
Support SNMP v1/v2c, MIB I, MIB II (RFC-1213) and private MIB
Support QoS (WMM) and wireless traffic shaping & Time settings
Support Ping watch dog
Operating Environment -25 ~ +75°C
Power AC 100~240V / DC 24V PoE
Cable arrestor for static discharge
Cable arrestor for static discharged
RSSI by LED
RSSI by LED

Inquiry

View Picture
Selected Items
Estimate Purchasing Quantity
Estimate Purchasing Schedule
2.4GHz 2T2R MIMO, 300Mbps, Multi-task Access Point EIRP 35dBm (4 Watt with 8-dBi MIMO antenna)
4W high output power 2T2R MIMO multi-task Access Point performing AP/CPE/Bridge. It is the best choice for all full out ...
Information of Contact Person

(Please enter full telephone number, including Country code, Area code. )

Company Information

( Including http:// )

Others

By submitting your contact information, you acknowledge that you consent to our processing data in accordance with the Privacy and Cookie Policy.