| AP Specification |
Standards Compliance
|
IEEE802.11b/g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
SDRAM
|
16 M Byte |
Flash
|
4 M Byte |
Radio Frequency Type
|
DSSS / OFDM |
Modulation
|
OFDM with BPSK, QPSK, 16-QAM, 64-QAM, DSSS with DBPSK, QPSK, CCK |
Frequency Band
|
America/ FCC: 2.414~2.462GHz (11 Channels)
Europe/ ETSI: 2.412~2.472GHz (13 Channels)
Japan/ TELEC: 2.412~2.484GHz (14 Channels) |
Transmission Power
|
802.11b: 27 ± 1dBm
802.11g: 26 ± 1dBm
802.11n: 22 ± 1dBm |
Transmission Rate
|
802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back
802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps
802.11n (20MHz): up to 72Mbps
802.11n (40MHz): up to 150Mbps |
Access Point Interfaces
|
Auto sensing MDI/MDI-X Ethernet 10/100Base-TX:RJ-45 x 2
(LAN x 1, WAN x 1) |
Sensitivity
|
802.11b: -93dBm
802.11g: -91dBm
802.11n: -89dBm |
| Antenna Type |
Internal
|
Integrated 9dBi directional antenna (Vertical-Polarization)
■ Horizontal: 60 degree
■ Vertical: 30 degree |
| External |
RP-SMA type connector
■ Switchable by Software
■ For External Antenna Mode, attach antenna before power on |
|
| Wireless Setting |
AP, Client, WDS PtP, WDS PtMP, WDS Repeater (AP+WDS), Universal Repeater (AP+Client) |
| Software/Firmware
|
Operation mode support Bridge, Gateway, Ethernet Converter (WISP)
Support Channel Bandwidth 20/40 MHz adjustable
DHCP Server / Client
Suppressed SSID Broadcast
Station Separation
Support 802.1d STP- Spanning Tree Protocol
Wireless access control by MAC address filter
Web-based configuration via popular browser (MS IE, Netscape…)
Firmware upgrade and configuration backup via Web
Reset to default by WebUI or by Reset button
VPN pass-through (PPTP, L2TP, IPSEC)
Support UPnP, IGMP Proxy, DNS Proxy
Support Dynamic DNS, SysLog
Support Firewall with SPI, NAT server Port Forwarding, and DMZ
Built-in Firewall with Port / IP address / MAC / URL filtering
Support NTP (Network Time Management)
Support Wired Client Max. 60, Wireless Client Max. 25, WDS AP Max. 4 |
Environment
|
Operating Temperature: -20 ~ +70°C, Humidity: 10~95% non-condensing
Storage Temperature: -30~+80°C, Humidity: 5~95% non-condensing |
Power
|
Passive PoE / 12V DC± 5%; 1A (Max.); AC adapter AC 100V ~ 240V
Reset Button on PoE Injector
LAN RJ-45 Pin Assignment: PIN 4(+), PIN 7,8(-), PIN 5(Reset) |
Regulatory Approval
|
FCC / CE / RoHS |
Network Management
System OS Support
|
Windows 2000 / XP / Vista / Windows 7 |
| Warranty |
One year limited |
|
