| |
| IRF-620
|
Media Converter : Ethernet/Fiber-optic
|
 |
The IRF-620 Media Converter is a feature-packed solution for expanding or extending an existing Ethernet / Fast Ethernet network. This converter boasts enhanced features like remote and local Loopback Testing, auto-negotiation, and link-fault signaling for total reliability. It also features DIP switches for manual activation of the enhanced features. This gives the IRF-620 the ability to be quickly integrated into a network configuration.
The IRF-620 can support a variety of fiber-optic cables and connectors that can extend distances up to 120km and offer flexibility in the migration to 100Base-FX networks.
|
|
| |
| Main Features: |
- Complies with IEEE 802.3 (10Base-T) & 802.3u 100Base-TX/FX standards
- Extends distances to between 2km (multi-mode fiber) and 120km (single-mode fiber)
- NWay Auto-negotiation support on RJ-45 port
- DIP switch manual setting on 10 or 100 and half-or full-duplex in case of auto-negotiation failure -- copper port only
- Store-and-forward at full wire speed
- Auto-MDI/MDI-X
|
- Manual setting on speed and duplex for compatibility with non-auto-negotiation devices
- Link Fault Signaling LED illuminates to indicate link down
- Device DIP switches allow multiple configuration options
- Link Fault Signaling function can boot up redundant link if network is installed with primary and redundant link
- Local and remote loopback test for first-time installation and troubleshooting
- FCC Class A & CE approved
|
 |
|
| |
| Specifications |
Standards:
|
IEEE 802.3 (10BASE-T Ethernet);
IEEE 802.3u (100BASE-TX/FX Fast Ethernet) |
| Ports: |
1 x UTP (RJ-45)
1 x Fiber 100Base-FX (SC/ST ; Multi-mode/Single-mode) |
| Max Distances: |
UTP: 100m
Fiber: Up to 120km (Single-mode) |
| Power: |
Power Input: 9 ~ 48V DC |
| Temperature: |
Operating: 0°C to 70°C
Storage: -20°C to 80°C |
| Humidity: |
Operating: 10% to 95% RH
Storage: 5% to 95% RH |
Emissions:
|
FCC Part 15 of Class A & CE Approved |
| Dimensions: |
100 x 50 x 120 mm (D x W x H) |
| Weight: |
450g |
| Unit LEDs: |
100: Green - Illuminated when data packets are being transmitted at 100Mbps
LFS: Red - Illuminated when a break or disruption exists in copper or fiber links
LNK / ACT: Green - Illuminated when receiving link pulses from compliant device / Flashing to indicate data packets being sent / received
FDX / COL: Amber - Illuminated to indicate unit is in full duplex mode / Flashing to indicate collision
PWR: Green - Illuminated to indicate unit is operating under normal power
RPS: Green - Illuminates for redundant power
ALM: Red - Illuminates when power or link fails |
|
| |
| Applications: |
- Industrial/Factory/Laboratory automation SCADA systems
- Self-service banking systems
- Factory robots and HVAC control systems
- Wafer fabrication systems
- Point of Sale (POS) systems
- Security cameras or other remote distributed serial devices
- Any application where ruggedness, durability and shock/vibration-proof qualities are required
|
 |
|
| |
| Ordering Information: |
IRF-620MT/MC:
10/100Base-TX to 100Base-FX Multi-mode Converter (ST/SC Connector) |
IRF-620SC-30/60/100/120:
10/100Base-TX to 100Base-FX Single-mode Converter (SC Connector, 30/60/100/120km) |
|
|
| E-mail:
business@hotware.com.tw
Tel: +886-3-4639125
Fax:+886-3-4639367 |
|