Application

Application

Dual-MIMO-applications

Dual-MIMO applications
Space Diversity High Capacity NLOS Wireless Redundancy Solution
RF + Hardware + Power Source Redundancy Solutions
  • Dual RF Channels
  • Space Diversity Technology
  • Enhanced technology to counter Multipath interference
  • Provides complete failover redundancy with RING topology
  • Support modes: Round Robin, FDD Full Duplex & Hot-standby
  • Maximum TCP/IP throughput of up to 320Mbps
  • IP-68 Water & Dust Resistant
  • IEC61000-4-5 Surge Protection
  • Outstanding MTBF
Radio Specification:
  • Available frequencies :
  • 2.2 – 2.6 GHz
    3.3 – 3.7 GHz
    4.9 – 6.1 GHz
    5.9 – 6.4 GHz
    Welcome frequency Customizable: 20MHz ~ 8GHz
  • Modulation: Dual 2x2 MIMO HT-OFDM
  • 16 Channel bandwidth selectable
  • 2.5, 3, 3.5, 4, 5, 6, 7, 8, 10, 12, 14, 15, 20, 30, 40, 52 MHz
  • Output power: 27dBm (Up to 3Watts)
  • Operating mode:
  • Ring / Round Robin / Active Backup
  • Max throughput: 320 Mbps
  • RF interfaces: 4 of N-type connectors
Targeted Application
2+0: RF1 (100Mbps @20MHz BW) + RF2 (100 Mbps @20MHz BW)
Utilize multipath, secure at least one path in case any path loss caused by interference. The total throughput is easily maintaining more than 100Mbps TCP Throughput.
  • Dual channels aggregated with up to 320Mbps TCP throughput.
  • Good for LOS backhaul.
  • 4.9-6.1GHz 23dBi 2x2 MIMO panel antenna.
  • Dual channels FDD, Full Duplex and throughput up to 160Mbps TCP throughput dedicated to each uplink and downlink respectively.
  • Good for Full Duplex LOS backhaul.
  • 4.9-6.1GHz 23dBi 2x2 MIMO panel antenna.

  • Dual channels Active Backup Redundant up to 260Mbps TCP throughput.
  • Good for LOS backhaul.
  • 4.9-6.1GHz 23dBi 2x2 MIMO panel antenna.

Equipment Layout & RING Redundancy Setup

RING redundancy scenario


Please contact us for more spec. and application details.